Few things disrupt a household like losing hot water, or discovering a geyser has burst and soaked the ceiling. Easy Fix Plumbers handles the full range of geyser work across Cape Town and the northern suburbs: fast repairs, same day replacements, brand-new installations and solar geyser systems, all fitted by licensed, PIRB registered plumbers and done to SANS standard.
Our geyser services
Whether your geyser needs a quick fix or a full replacement, we carry common parts and can usually resolve the problem on the first visit.
Geyser repairs
A cold or leaking geyser does not always need replacing. We diagnose the actual fault, a failed element, faulty thermostat, leaking safety valve, worn anode or a tripping isolator, and repair it properly. If your geyser is relatively young and the cylinder is sound, a repair is usually the sensible, cost-effective choice.
Geyser replacements
When a cylinder has rusted through or a geyser has reached the end of its life, replacement is the only real fix. We remove the old unit, supply and fit a quality replacement, and bring the whole installation up to standard with the correct safety fittings, often on the same day, so you are not left without hot water.
New geyser installations
Building, renovating or adding a second geyser? We install electric and solar geysers correctly the first time, sized to your household’s hot-water needs and positioned for easy future maintenance. Every installation includes the safety components required by SANS regulations.
Solar geyser installations
With Cape Town’s sunshine and rising electricity costs, a solar geyser is one of the smartest upgrades a homeowner can make. We install direct and indirect solar systems, as well as conversions of existing electric geysers to solar, and advise honestly on what suits your roof, budget and usage.
Signs your geyser needs attention
Geysers rarely fail without warning. Book a plumber if you notice:
- Water that is lukewarm or runs cold quickly, often a failing element or thermostat.
- Rusty or discoloured hot water, which can signal corrosion inside the cylinder.
- Dripping from the overflow pipe outside, usually a worn safety or pressure valve.
- Damp patches or staining on the ceiling below the geyser.
- Banging, popping or knocking sounds from mineral build-up.
- An isolator that keeps tripping, which points to an electrical fault.
Acting on these early often means a straightforward repair instead of a burst geyser and a flooded ceiling. If you want to understand the warning signs in more detail, our blog on signs your geyser is about to burst is a useful read.
Repair or replace? An honest answer
We will always tell you what we would do in your position. As a rough guide, a repair usually makes sense when the geyser is under about eight years old, the cylinder is sound, and the fault is a serviceable part like an element or thermostat. Replacement is the better call when the cylinder itself is leaking, the unit is well past its expected life, or repeated faults are adding up to more than a new geyser would cost. We give you the facts and the pricing, and you decide, no pressure.
Electric versus solar geysers
Both have their place. A conventional electric geyser is cheaper to install and perfectly reliable, which suits many homes. A solar geyser costs more upfront but slashes the electricity your water heating uses, and in sunny Cape Town, that payback adds up faster than many people expect. If you are replacing a geyser anyway, it is the ideal moment to consider whether solar is worth it for your household. We will talk you through the options based on your roof orientation, water usage and budget rather than pushing the most expensive system.
Geyser installations done to standard
A geyser is a pressure vessel connected to your electrics, so a compliant installation matters for both safety and insurance. Every installation and replacement we carry out includes the fittings SANS requires, such as:
- A correctly rated temperature and pressure safety valve.
- A pressure-control (expansion relief) valve matched to your supply.
- A vacuum breaker on the hot and cold sides.
- A drip tray and overflow routed to a safe, visible discharge point.
- Proper electrical isolation and secure mounting.
Doing it right protects your home, keeps your insurer happy, and means the installation will pass when you need a Plumbing Certificate of Compliance.
Burst geyser? Here is what to do
If your geyser has burst or is pouring water, switch it off at the distribution board, close the main water stopcock, and move anything valuable clear of the water. Then book us in as an emergency with your address and we will get your hot water back as quickly as possible, repairing or replacing the unit the same day where we can.
What does a geyser repair or replacement cost?
It depends on the fault and, for replacements, on the size and type of geyser. A single part repair is modest; a full replacement with new safety fittings is a bigger job. What stays the same is our approach: we assess the geyser, explain what it needs, and give you a clear, upfront price to approve before we start. No surprises.
Why choose Easy Fix for your geyser
- Licensed, PIRB registered plumbers doing SANS compliant installations.
- Same day repairs and replacements so you are not left without hot water.
- Honest advice on repair versus replace, and electric versus solar.
- Upfront pricing and a genuine workmanship guarantee.
Areas we serve
We install and repair geysers across Cape Town and the northern suburbs, including Cape Town, Bellville, Durbanville, Milnerton and Table View, plus the surrounding areas. Add your address to the booking form and we will confirm we can reach you.
Geyser types we work with
Not every home needs the same geyser, and fitting the right type saves money and hassle down the line.
Electric geysers
The standard choice in most Cape Town homes, reliable, affordable to install and simple to service. We fit the correct size for your household, because an undersized geyser leaves you short of hot water while an oversized one wastes electricity keeping water hot that you never use.
Solar geysers
Direct systems circulate your water through the collector on the roof, while indirect systems use a separate fluid loop, which suits areas with harder water. Both dramatically cut the electricity your water heating uses. We help you choose based on your roof, water quality and how much hot water your household gets through.
Low-pressure and specialised systems
Some older homes and specific applications use low-pressure geysers. We work with these too and can advise whether converting to a modern high-pressure system is worthwhile when the time comes to replace.
Getting the most out of your geyser
A geyser is one of the hardest-working appliances in your home, and a little care noticeably extends its life:
- Have it serviced periodically, checking the element, thermostat, anode and safety valve catches wear before it becomes a failure.
- Replace the sacrificial anode when it is worn, so the cylinder itself is protected from corrosion.
- Control your pressure with a correctly set valve, since high pressure is hard on the whole system.
- Set a sensible temperature, hot enough to be safe and useful, without needlessly cooking the element and wasting power.
- Insulate the geyser and hot-water pipes to reduce standing heat loss.
Servicing costs a fraction of a replacement, and it is a lot more pleasant than an unexpected cold shower.
Solar geysers and your electricity bill
Water heating is one of the biggest electricity users in a typical home. In a sunny city like Cape Town, a well-sized solar geyser can carry much of that load for free, which is why so many homeowners look at solar when their old electric unit finally gives up. The upfront cost is higher, but the ongoing saving, and the insulation it gives you against rising tariffs, makes it one of the more sensible home upgrades available. When we quote a replacement, we are happy to show you the electric and solar options side by side so you can make an informed choice rather than a rushed one.
Geyser insurance claims
Many geyser replacements in Cape Town are covered by household insurance. If your geyser has burst, it is worth checking your policy, and we are happy to carry out the work to the standard your insurer expects, with the correct compliant fittings. Getting the installation right the first time keeps everything above board and avoids problems later if you claim or sell.
Book your geyser service
Complete the booking form at the top of this page with your address and a short description of the problem, and we will confirm your appointment fast. For anything urgent, see our emergency plumbing service, or explore our COC certificates if you are preparing to sell.
